vishay semiconductors vlmo30.., vlms30.., vlmy30.. document number 81322 rev. 1.3, 30-sep-10 www.vishay.com 1 for technical support, please contact: led@vishay.com low current smd led features ? smd led with exceptional brightness ? compatible with automatic placement equipment ? eia and ice standard package ? compatible with ir reflow, vapor phase and wave solder processes according to cecc 00802 and j-std-020 ? available in 8 mm tape ? low profile package ? non-diffused lens: exce llent for coupling to light pipes and backlighting ? very low power consumption ? luminous intensity ratio in one packaging unit i vmax. /i vmin. 1.6 ? esd withstand voltage: up to 2 kv according to jesd22-a114-b ? preconditioning: acco rding to jedec level 2a ? aec-q101 qualified ? compliant to rohs directive 2002/95/ec and in accordance to weee 2002/96/ec 19225 description these new devices have been designed to meet the increasing demand for allngap based low current smd leds. the package of the vlm.30.. is the plcc-2 package. it consists of a lead frame which is embedded in a white thermoplast. the reflector inside this package is filled up with clear epoxy. product group and package data ? product group: led ? package: smd plcc-2 ? product series: low current ? angle of half intensity: 60 applications ? automotive: backlighting in dashboards and switches ? telecommunication: indicator and backlighting in telephone and fax ? indicator and backlight for audio and video equipment ? indicator and backlight for battery driven equipment ? indicator and backlight in office equipment ? flat backlight for lcds , switches and symbols ? general use parts table part color, luminous intensity technology vlms3000-gs08 super red, i v > 2.8 mcd allngap vlms3000-gs18 super red, i v > 2.8 mcd allngap vlms30j1k2-gs08 super red, i v = (4.5 to 11.2) mcd allngap vlms30j1k2-gs18 super red, i v = (4.5 to 11.2) mcd allngap vlms30k1l2-gs08 super red, i v = (7.1 to 18) mcd allngap vlms30k1l2-gs18 super red, i v = (7.1 to 18) mcd allngap
www.vishay.com 2 document number 81322 rev. 1.3, 30-sep-10 vishay semiconductors vlmo30.., vlms30.., vlmy30.. for technical support, please contact: led@vishay.com note: 1) driving the led in reve rse direction is suitable for short term application vlms30j1l2-gs08 super red, i v = (4.5 to 18) mcd allngap vlms30j1l2-gs18 super red, i v = (4.5 to 18) mcd allngap vlms30j2k2-gs08 super red, i v = (5.6 to 11.2) mcd allngap vlms30j2k2-gs18 super red, i v = (5.6 to 11.2) mcd allngap vlms30k2l2-gs08 super red, i v = (9 to 18) mcd allngap vlmo3000-gs08 orange, i v > 5.6 mcd alingap VLMO3000-GS18 orange, i v > 5.6 mcd alingap vlmo30k1l2-gs08 orange, i v = (7.1 to 18) mcd alingap vlmo30k1l2-gs18 orange, i v = (7.1 to 18) mcd alingap vlmo30l1m2-gs08 orange, i v = (11.2 to 28) mcd alingap vlmo30l1m2-gs18 orange, i v = (11.2 to 28) mcd alingap vlmo30k1m2-gs08 orange, i v = (7.1 to 28) mcd alingap vlmo30k1m2-gs18 orange, i v = (7.1 to 28) mcd alingap vlmy3000-gs08 ye l l o w, i v > 4.5 mcd alingap vlmy3000-gs18 ye l l o w, i v > 4.5 mcd alingap vlmy3001gs08 ye l l o w, i v = (7.1 to 18) mcd alingap vlmy3001-gs18 ye l l o w, i v = (7.1 to 18) mcd alingap vlmy30j2l1-gs08 ye l l o w, i v = (5.6 to 14) mcd alingap vlmy30j2l1-gs18 ye l l o w, i v = (5.6 to 14) mcd alingap vlmy30k2m1-gs08 ye l l o w, i v = (9 to 22.4) mcd alingap vlmy30k2m1-gs18 ye l l o w, i v = (9 to 22.4) mcd alingap vlmy30j2m1-gs08 ye l l o w, i v = (5.6 to 22.4) mcd alingap vlmy30j2m1-gs18 ye l l o w, i v = (5.6 to 22.4) mcd alingap absolute maximum ratings (t amb = 25 c, unless otherwise specified) vlm30.. parameter test condition symbol value unit reverse voltage 1) v r 6v dc forward current i f 15 ma surge forward current t p 10 s i fsm 0.1 a power dissipation p v 40 mw junction temperature t j 125 c operating temperature range t amb - 40 to + 100 c storage temperature range t stg - 40 to + 100 c thermal resistance junction/ ambient mounted on pc board (pad size > 16 mm 2 ) r thja 400 k/w parts table part color, luminous intensity technology
document number 81322 rev. 1.3, 30-sep-10 www.vishay.com 3 vishay semiconductors vlmo30.., vlms30.., vlmy30.. for technical support, please contact: led@vishay.com note: 1) in one packing unit i vmax. /i vmin. 1.6 note: 1) in one packing unit i vmax. /i vmin. 1.6 note: 1) in one packing unit i vmax. /i vmin. 1.6 optical and electrical characteristics (t amb = 25 c, unless otherwise specified) vlms30.., red parameter test condition part symbol min. typ. max. unit luminous intensity 1) i f = 2 ma vlms3000 i v 2.8 mcd i f = 10 ma vlms3000 i v 20 mcd i f = 2 ma vlms30j1k2 i v 4.5 11.2 mcd i f = 2 ma vlms30k1l2 i v 7.1 18 mcd i f = 2 ma vlms30j1l2 i v 4.5 18 mcd i f = 2 ma vlms30j2k2 i v 5.6 11.2 mcd i f = 2 ma vlms30k2l2 i v 918mcd dominant wavelength i f = 2 ma d 624 636 nm peak wavelength i f = 2 ma p 635 nm angle of half intensity i f = 2 ma ? 60 deg forward voltage i f = 2 ma v f 1.8 2.2 v reverse voltage i r = 10 a v r 615 v optical and electrical characteristics (t amb = 25 c, unless otherwise specified) vlmo30.., orange parameter test condition part symbol min. typ. max. unit luminous intensity 1) i f = 2 ma vlmo3000 i v 5.6 mcd i f = 10 ma vlmo3000 i v 50 mcd i f = 2 ma vlmo30k1l2 i v 7.1 18 mcd i f = 2 ma vlmo30l1m2 i v 11.2 28 mcd i f = 2 ma vlmo30k1m2 i v 7.1 28 mcd dominant wavelength i f = 2 ma d 600 609 nm peak wavelength i f = 2 ma p 610 nm angle of half intensity i f = 2 ma ? 60 deg forward voltage i f = 2 ma v f 1.8 2.2 v reverse voltage i r = 10 a v r 615 v optical and electrical characteristics (t amb = 25 c, unless otherwise specified) vlmy30.., yellow parameter test condition part symbol min. typ. max. unit luminous intensity 1) i f = 2 ma vlmy3000 i v 4.5 mcd i f = 10 ma vlmy3000 i v 50 mcd i f = 2 ma vlmy3001 i v 7.1 18 mcd i f = 2 ma vlmy30j2l1 i v 5.6 14 mcd i f = 2 ma vlmy30k2m1 i v 9 22.4 mcd i f = 2 ma vlmy30j2m1 i v 5.6 22.4 mcd dominant wavelength i f = 2 ma d 581 594 nm peak wavelength i f = 2 ma p 585 nm angle of half intensity i f = 2 ma ? 60 deg forward voltage i f = 2 ma v f 1.8 2.2 v reverse voltage i r = 10 a v r 615 v
www.vishay.com 4 document number 81322 rev. 1.3, 30-sep-10 vishay semiconductors vlmo30.., vlms30.., vlmy30.. for technical support, please contact: led@vishay.com note: luminous intensity is tested at a current pulse duration of 25 ms and an accuracy of 11 %. the abov e type numbers represent the order grous which include only a few brightness groups. only one group will be shipped in one reel (there will be no mixing of two groups on each reel). in order to ensure availability, singl e brightness groups will not be orderable. in a similar manner for colors where wavelength groups are measured and binned, single wavelength groups will be shipped in any one reel. in order to ensure availability, single wavelength groups will not be orderable. note: wavelengths are tested at a current pulse duration of 25 ms and an accuracy of 1 nm. typical characteristics (t amb = 25 c, unless otherwise specified) luminous intensity classification group light intensity (mcd) standard optional min. max. h 1 2.8 3.55 2 3.55 4.5 j 1 4.5 5.6 2 5.6 7.1 k 1 7.1 9.0 2 9.0 11.2 l 1 11.2 14.0 2 14.0 18.0 m 1 18.0 22.4 2 22.4 28.0 color classification group yellow orange dom. wavelength (nm) min. max. min. max. 1 581 584 2 583 586 600 603 3 585 588 602 605 4 587 590 604 607 5 589 592 606 609 6 591 594 crossing table vishay osram vlmo30k1l2 lot67k-k1l2 vlmo30k1m2 lot67k-k1m2 vlmo30l1m2 lot67k-l1m2 vlms30j1k2 lst67k-j1k2 vlms30j1l2 lst67k-j1l2 vlms30k1l2 lst67k-k1l2 vlmy30j2l1 lyt67k-j2l1 vlmy30j2m1 lyt67k-j2m1 vlmy30k2m1 lyt67k-k2m1 figure 1. forward current vs. ambient temperature 0 5 10 15 20 25 i f - for w ard c u rrent (ma) 1 8 254 100 8 0 60 40 20 0 t am b - am b ient temperat u re (c) figure 2. forward current vs. pulse length 10 100 1000 0.01 0.1 1 10 100 t p - p u lse d u ration (ms) 17557 i f - for w ard c u rrent (ma) t p /t= 0.01 0.05 0.2 0.5 1 0.02 0.1
document number 81322 rev. 1.3, 30-sep-10 www.vishay.com 5 vishay semiconductors vlmo30.., vlms30.., vlmy30.. for technical support, please contact: led@vishay.com figure 3. rel. luminous intensity vs. angular displacement figure 4. relative intensity vs. wavelength figure 5. forward current vs. forward voltage 0.4 0.2 0 95 10319 0.6 0.9 0. 8 0 30 10 20 40 50 60 70 8 0 0.7 1.0 i v rel - relati v e l u mino u s intensity ? - ang u lar displacement 0.0 0.2 0.4 0.6 0. 8 1.0 1.2 540 5 8 0 620 660 700 - w a v elength (nm) 1 8 266 i v rel - relati v e l u mino u s intensity orange red yello w 1 10 100 1 1.5 2 2.5 3 v f - for w ard v oltage ( v ) 95 10 8 7 8 i f - for w ard c u rrent (ma) figure 6. rel. luminous intens ity vs. ambient temperature figure 7. forward voltage vs. ambient temperature 0 0.25 0.50 0.75 1.00 1.25 1.50 1.75 2.00 2.25 2.50 - 40 - 20 0 20 40 60 8 0 100 t am b - am b ient temperat u re (c) 1 8 251 i v rel - relati v e l u mino u s intensity yello w orange red 1.65 1.70 1.75 1. 8 0 1. 8 5 1.90 1.95 2.00 - 40 - 20 0 20 40 60 8 0 100 t am b - am b ient temperat u re (c) 1 8 252 v f rel - for w ard v oltage ( v ) yello w orange red
www.vishay.com 6 document number 81322 rev. 1.3, 30-sep-10 vishay semiconductors vlmo30.., vlms30.., vlmy30.. for technical support, please contact: led@vishay.com package dimensions in millimeters 20541 mounting pad layout 1.2 2.6 (2. 8 ) 1.6 (1.9) 4 4 area co v ered w ith solder resist 3.5 0.2 3 + 0.15 1.75 0.1 0.9 2. 8 0.15 ca pin identification 2.2 ? 2.4 technical dra w ings according to di n specifications dra w ing- n o.: 6.541-5067.01-4 iss u e: 5; 04.11.0 8
vishay semiconductors vlmo30.., vlms30.., vlmy30.. document number 81322 rev. 1.3, 30-sep-10 www.vishay.com 7 for technical support, please contact: led@vishay.com method of taping/polarity and tape and reel smd led (vlm.3 - series) vishay?s leds in smd pack ages are available in an antistatic 8 mm blister tape (in accordance with din iec 40 (co) 564) for automatic component insertion. the blister tape is a plastic strip with impressed component cavities, covered by a top tape. taping of vlm.3... reel package dimension in millimeters for smd leds, tape option gs08 (= 1500 pcs.) reel package dimension in millimeters for smd leds, tape option gs18 (= 8000 pcs.) preferred figure 8. tape dimensions in mm for plcc-2 adhesi v e tape component ca v ity blister tape 94 8 670 1. 8 5 1.65 4.0 3.6 3.6 3.4 2.05 1.95 1.6 1.4 4.1 3.9 4.1 3.9 5.75 5.25 8 .3 7.7 3.5 3.1 2.2 2.0 0.25 94 8 66 8 figure 9. reel dimensions - gs08 figure 10. reel dimensions - gs18 1 8 0 17 8 4.5 3.5 2.5 1.5 13.00 12.75 63.5 60.5 14.4 max. 10.0 9.0 120 94 8 665 identification la b el: v ishay type gro u p tape code prod u ction code qu antity 321 329 identification 4.5 3.5 2.5 1.5 13.00 12.75 62.5 60.0 14.4 max. 10.4 8 .4 120 1 88 57 la b el: v ishay type gro u p tape code prod u ction code qu antity
www.vishay.com 8 document number 81322 rev. 1.3, 30-sep-10 vishay semiconductors vlmo30.., vlms30.., vlmy30.. for technical support, please contact: led@vishay.com soldering profile bar code product label example: a) type of component b) manufacturing plant c) sel - selection code (bin): e.g.: k1 = code for luminous intensity group 3 = code for color group d) date code year/week e) day code (e.g. 5: friday) f) batch no. g) total quantity h) company code figure 11. vishay lead (pb)-fr ee reflow soldering profile (acc. to j-std-020) figure 12. double wave soldering of opto devices (all packages) 0 50 100 150 200 250 300 0 50 100 150 200 250 300 time (s) temperat u re (c) 240 c 245 c max. 260 c max. 120 s max. 100 s 217 c max. 30 s max. ramp u p 3 c/s max. ramp do w n 6 c/s 19 88 5 ir reflo w soldering profile for lead (p b )-free soldering preconditioning acc. to jedec le v el 2a max. 2 cycles allo w ed 255 c 235 c to 260 c 2 k/s ca. 200 k/s second w a v e first w a v e 5 s f u ll line: typical dotted line: process limits time (s) temperat u re (c) lead temperat u re 300 250 200 150 100 50 0 0 50 100 150 200 250 94 8 626-1 tt w soldering (acc. to cecc00 8 02) 100 c to 130 c forced cooling ca. 2 k/s ca. 5 k/s 106 37 a h bc d e f g v ishay 20119
document number: 91000 www.vishay.com revision: 18-jul-08 1 disclaimer legal disclaimer notice vishay all product specifications and data are subject to change without notice. vishay intertechnology, inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, ?vishay?), disclaim any and all liability fo r any errors, inaccuracies or incompleteness contained herein or in any other disclosure relating to any product. vishay disclaims any and all li ability arising out of the use or application of any product describ ed herein or of any information provided herein to the maximum extent permit ted by law. the product specifications do not expand or otherwise modify vishay?s terms and conditions of purcha se, including but not limited to the warranty expressed therein, which apply to these products. no license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of vishay. the products shown herein are not designed for use in medi cal, life-saving, or life-sustaining applications unless otherwise expressly indicated. customers using or selling vishay products not expressly indicated for use in such applications do so entirely at their own risk and agree to fully indemnify vishay for any damages arising or resulting from such use or sale. please contact authorized vishay personnel to obtain written terms and conditions regarding products designed for such applications. product names and markings noted herein may be trademarks of their respective owners.
|
